View MKP3381X108_4521417.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MKP 338 1 X1
Vishay BCcomponents
Interference Suppression Film Capacitors MKP Radial Potted Type
l h lt P O dt F' F 10 15 (1) H O dt w l h h' w
FEATURES
15 to 27.5 mm lead pitch and 15 mm bent back to 7.5 mm. Supplied loose in box, taped on ammopack or reel RoHS-compliant product
PERMISSIBLE DC VOLTAGE
DC 1000 V
Dimensions in mm Note (1) |F - F'| < 0.3 mm F = 7.5 + 0.6/- 0.1 mm
ENCAPSULATION
Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
APPLICATIONS
For standard across the line X1 applications. See also Application Note: www.vishay.com/docs/28153/anaccaps.pdf
CLIMATIC TESTING CLASS ACC. TO IEC 60068-1
55/105/56/B
CAPACITANCE RANGE (E12 SERIES) REFERENCE STANDARDS
"IEC 60384-14 ed-3 and EN 60384-14" "IEC 60065, pass. flamm. class B" UL1414; UL1283; CSA-C22.2 No. 8 E12 series 0.01 to 1 F Preferred values acc. to E6
CAPACITANCE TOLERANCE
20 %; 10 %; 5 %
MARKING
C-value; tolerance; rated voltage; sub-class; manufacturer's type designation; code for dielectric material; manufacturer location; manufacturer's logo; year, week and safety approvals.
LEADS
Tinned wire
MAXIMUM APPLICATION TEMPERATURE
105 C
DIELECTRIC
Polypropylene film
DETAIL SPECIFICATION
For more detailed data and test requirements contact: RFI@vishay.com
ELECTRODES
Metallized film
CONSTRUCTION
Mono construction
RATED VOLTAGE
AC 440 V; 50 to 60 Hz
Document Number: 28116 Revision: 10-Oct-08
For technical questions, contact: RFI@vishay.com
www.vishay.com 165
MKP 338 1 X1
Vishay BCcomponents
Interference Suppression Film Capacitors MKP Radial Potted Type
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES 338 1 X1 7.5 mm (bent back) 15.0 mm 22.5 mm 27.5 mm
CAPACITANCE (numerically) Example: 104 = 10 x 10 = 100 nF (except special numbers)
MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5
BFC2 2222(*)
(*) Old ordering code TYPE 338 1 X1 Taped on reel (1) 338 1 X1 X1 PACKAGING Loose in box
338 1X XX X 338 1X XX X
C-TOL PREFERRED TYPES BFC2 338 10 ... BFC2 338 12 ... BFC2 338 14 ... BFC2 338 16 ... ON REQUEST 20 % BFC2 338 17 ... ON REQUEST 10 % 5% 10 % 5% 10 % 5% 10 % 5% 10 % 5%
LEAD CONFIGURATION Lead length 3.5 0.3 mm Lead length 5.0 1.0 mm Lead length 25.0 2.0 mm Bent back to 7.5 mm; H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm ALTERNATIVE TAPED VERSIONS H = 18.5 mm; for P0 = 12.7 mm; reel diameter = 500 mm ALTERNATIVE C-TOL. Lead length 3.5 0.3 mm
20 %
Taped on reel (1)
Loose in box 338 1 X1 Taped on reel (1)
Lead length 5.0 1.0 mm Lead length 25.0 2.0 mm Bent back to 7.5 mm; H = 16.0 mm; P0 = 15.0 mm; reel diameter = 500 mm H = 18.5 mm; P0 = 12.7 mm; reel diameter = 500 mm
See tables for detail
Notes (1) For detailed tape specification refer to Packaging Information: www.vishay.com/docs/28139/packinfo.pdf (2) SPQ = Standard Packaging Quantity
SPECIFIC REFERENCE DATA
DESCRIPTION Rated AC voltage (URac) Permissible DC voltage (URdc) Tangent of loss angle: C 470 nF C > 470 nF Rated voltage pulse slope (dU/dt)R at 615 Vdc Pitch = 15 mm and 7.5 mm (bent back) Pitch = 22.5 mm Pitch = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 min RC between leads, for C > 0.33 F at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case Maximum application temperature www.vishay.com 166 For technical questions, contact: RFI@vishay.com VALUE 440 V 1000 V at 1 kHz 10 x 10-4 20 x 10-4 250 V/s 150 V/s 100 V/s > 15 000 M > 5000 s > 30 000 M 3400 V; 1 min 2380 V; 1 min 105 C Document Number: 28116 Revision: 10-Oct-08 at 10 kHz 20 x 10-4 70 x 10-4
MKP 338 1 X1
Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type
C - tol = 20 %
DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 338...... AND PACKAGING TAPED LOOSE IN BOX reel diameter = 500 mm Short leads Long leads lt = 3.5 0.3 mm lt = 5.0 1.0 mm 12103 12123 12153 12183 12223 12273 12333 12393 12473 12563 12683 12823 12104 12124 12154 12184 12224 12274 12334 12394 12474 12564 12684 12824 12105 SPQ lt = 25.0 2.0 mm 14103 14123 14153 14183 14223 14273 14333 14393 14473 14563 14683 14823 14104 14124 14154 14184 14224 14274 14334 14394 14474 14564 14684 14824 14105 SPQ H = 18.5 mm; P0 = 12.7 mm 17103 17123 17153 17183 17223 17273 17333 17393 17473 17563 17683 17823 17104 17124 17154 17184 17224 SPQ
C (F)
MASS (g) (1)
Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.01 10103 0.012 10123 0.015 5.0 x 11.0 x 17.5 1.0 10153 0.018 10183 0.022 10223 0.027 10273 6.0 x 12.0 x 17.5 1.4 0.033 10333 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.039 10393 7.0 x 13.5 x 17.5 1.8 0.047 10473 0.056 10563 8.5 x 15.0 x 17.5 2.4 0.068 10683 0.082 10823 10.0 x 16.5 x 17.5 3.0 0.1 10104 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.12 10124 8.5 x 18.0 x 26.0 3.8 0.15 10154 0.18 10184 10.0 x 19.5 x 26.0 6.8 0.22 10224 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.27 11.0 x 21.0 x 31.0 7.4 10274 0.33 13.0 x 23.0 x 31.0 9.2 10334 0.39 10394 15.0 x 25.0 x 31.0 12.3 0.47 10474 0.56 10564 18.0 x 28.0 x 31.0 16.1 0.68 10684 0.82 10824 21.0 x 31.0 x 31.0 20.3 1.00 10105 Note (1) Weight for short lead products only
1000
1000
1100
1000
1000
900
750 750 500
500 500 450
800 650 600
200 200 100 100 100 100 50
250 200 125 125 125 100 75
450 350
BENT BACK PITCH 7.5 mm (only taped); C-tol = 20 %
DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 338...... AND PACKAGING TAPED LOOSE IN BOX reel diameter = 500 mm (1) Short leads Long leads lt = 3.5 0.3 mm lt = 5.0 1.0 mm SPQ lt = 25.0 2.0 mm SPQ H = 16.0 mm; P0 = 15.0 mm 16103 16123 16153 16183 16223 16273 16333 16393 16473 16563 16683 16823 16104 SPQ
C (F)
MASS (g) (2)
Original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; dt = 0.60 0.06 mm 0.010 0.012 0.015 5.0 x 13.0 x 17.5 1.0 0.018 0.022 0.027 6.0 x 14.0 x 17.5 1.4 0.033 Original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; dt = 0.80 0.08 mm 0.039 7.0 x 15.5 x 17.5 1.8 0.047 0.056 8.5 x 17.0 x 17.5 1.4 0.068 0.082 10.0 x 18.5 x 17.5 3.0 0.100 Notes (1) Reel diameter = 356 mm is available on request (2) Weight for short lead product only Document Number: 28116 Revision: 10-Oct-08 For technical questions, contact: RFI@vishay.com
950
800
700 550 500
www.vishay.com 167
MKP 338 1 X1
Vishay BCcomponents
C-tol = 10 %
DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 338...... AND PACKAGING TAPED LOOSE IN BOX reel diameter = 500 mm Short leads Long leads lt = 3.5 0.3 mm lt = 5.0 1.0 mm 18314 18315 18316 18317 18318 18319 18321 18322 18323 18324 18325 18326 18327 18328 18329 18331 18332 18333 18334 18335 18336 18337 18338 18339 SPQ lt = 25.0 2.0 mm 18514 18515 18516 18517 18518 18519 18521 18522 18523 18524 18525 18526 18527 18528 18529 18531 18532 18533 18534 18535 18536 18537 18538 18539 SPQ H = 18.5 mm; P0 = 12.7 mm 18914 18915 18916 18917 18918 18919 18921 18922 18923 18924 18925 18926 18927 18928 18929 18931 SPQ
Interference Suppression Film Capacitors MKP Radial Potted Type
C (F)
MASS (g) (1)
Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.010 18114 0.012 18115 5.0 x 11.0 x 17.5 1.0 0.015 18116 0.018 18117 0.022 18118 6.0 x 12.0 x 17.5 1.4 0.027 18119 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.033 18121 7.0 x 13.5 x 17.5 1.8 0.039 18122 0.047 18123 8.5 x 15.0 x 17.5 2.4 0.056 18124 0.068 18125 10.0 x 16.5 x 17.5 3.0 0.082 18126 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.10 7.0 x 16.5 x 26.0 2.9 18127 0.12 18128 8.5 x 18.0 x 26.0 3.8 0.15 18129 0.18 10.0 x 19.5 x 26.0 6.8 18131 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.22 18132 11.0 x 21.0 x 31.0 7.4 0.27 18133 0.33 13.0 x 23.0 x 31.0 9.2 18134 0.39 18135 15.0 x 25.0 x 31.0 12.3 0.47 18136 0.56 18137 18.0 x 28.0 x 31.0 16.1 0.68 18138 0.82 21.0 x 31.0 x 31.0 20.3 18139 Note (1) Weight for short lead products only
1000
1000
1100
1000
1000
900
750 750 500 200 200 200 100 100 100 100 50
500 500 450 250 250 200 125 125 125 100 75
800 650 600 550 450 350
BENT BACK PITCH 7.5 mm (only taped); C-tol = 10 %
CATALOG NUMBER BFC2 338...... AND PACKAGING LOOSE IN BOX TAPED C MASS reel diameter = 500 mm (1) Short leads Long leads (F) (g) (2) lt = H = 18.5 mm; lt = lt = SPQ SPQ SPQ P0 = 12.7 mm 3.5 0.3 mm 5.0 1.0 mm 25.0 2.0 mm Original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; dt = 0.60 0.06 mm 0.010 18714 0.012 18715 5.0 x 13.0 x 17.5 1.0 950 0.015 18716 0.018 18717 0.022 18718 6.0 x 14.0 x 17.5 1.4 800 0.027 18719 Original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; dt = 0.80 0.08 mm 0.033 18721 7.0 x 15.5 x 17.5 1.8 700 0.039 18722 18723 0.047 8.5 x 17.0 x 17.5 2.4 550 0.056 18724 0.068 18725 10.0 x 18.5 x 17.5 3.0 500 0.082 18726 Notes (1) Reel diameter = 356 mm is available on request (2) Weight for short lead product only DIMENSIONS wxhxl (mm) www.vishay.com 168 For technical questions, contact: RFI@vishay.com Document Number: 28116 Revision: 10-Oct-08
MKP 338 1 X1
Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type
C-tol = 5 %
DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 338...... AND PACKAGING LOOSE IN BOX TAPED reel diameter = 500 mm Short leads Long leads lt = 3.5 0.3 mm lt = 5.0 1.0 mm 18414 18415 18416 18417 18418 18419 18421 18422 18423 18424 18425 18426 18427 18428 18429 18431 18432 18433 18434 18435 18436 18437 18438 18439 SPQ lt = 25.0 2.0 mm 18614 18615 18616 18617 18618 18619 18621 18622 18623 18624 18625 18626 18627 18628 18629 18631 18632 18633 18634 18635 18636 18637 18638 18639 SPQ H = 18.5 mm; P0 = 12.7 mm 18934 18935 18936 18937 18938 18939 18941 18942 18943 18944 18945 18946 18947 18948 18949 18951 SPQ
C (F)
MASS (g) (1)
Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.010 18214 0.012 18215 5.0 x 11.0 x 17.5 1.0 0.015 18216 0.018 18217 0.022 18218 6.0 x 12.0 x 17.5 1.4 0.027 18219 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.033 18221 7.0 x 13.5 x 17.5 1.8 0.039 18222 0.047 18223 8.5 x 15.0 x 17.5 2.4 0.056 18224 0.068 18225 10.0 x 16.5 x 17.5 3.0 0.082 18226 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.10 18227 8.5 x 18.0 x 26.0 3.8 0.12 18228 0.15 18229 10.0 x 19.5 x 26.0 4.4 0.18 18231 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.22 11.0 x 21.0 x 31.0 7.4 18232 0.27 18233 13.0 x 23.0 x 31.0 9.2 0.33 18234 0.39 18235 15.0 x 25.0 x 31.0 12.3 0.47 18236 0.56 18237 18.0 x 28.0 x 31.0 16.1 0.68 18238 0.82 21.0 x 31.0 x 31.0 20.3 18239 Note (1) Weight for short lead product only
1000
1000
1100
1000
1000
900
750 750 500
500 500 450
800 650 600
200 200 100 100 100 100 50
250 200 125 125 125 100 75
450 350
BENT BACK PITCH (only taped); C-tol = 5 %
CATALOG NUMBER BFC2 338...... AND PACKAGING LOOSE IN BOX TAPED reel diameter = 500 mm (1) Short leads Long leads lt = 3.5 0.3 mm lt = 5.0 1.0 mm SPQ lt = 25.0 2.0 mm SPQ H = 16.0 mm; P0 = 15.0 mm 18814 18815 18816 18817 18818 18819 18821 18822 18823 18824 18825 18826 SPQ
C (F)
DIMENSIONS wxhxl (mm)
MASS (g) (2)
Original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; dt = 0.60 0.06 mm 0.010 0.012 5.0 x 13.0 x 17.5 1.0 0.015 0.018 0.022 6.0 x 14.0 x 17.5 1.4 0.027 Original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; dt = 0.80 0.08 mm 0.033 7.0 x 15.5 x 17.5 1.8 0.039 0.047 8.5 x 17.0 x 17.5 2.4 0.056 0.068 10.0 x 18.5 x 17.5 3.0 0.082 Notes (1) Reel diameter = 356 mm is available on request (2) Weight for short lead product only Document Number: 28116 Revision: 10-Oct-08 For technical questions, contact: RFI@vishay.com
950
800
700 550 500
www.vishay.com 169
MKP 338 1 X1
Vishay BCcomponents
Interference Suppression Film Capacitors MKP Radial Potted Type
SAFETY APPROVALS X1 VOLTAGE VALUE FILE NUMBERS EN 60384-14 (ENEC) 440 Vac 10 nF to 1 F F1 2008060 (= IEC 60384-14 ed-3) UL1414 250 Vac 10 nF to 1 F E112471 UL1283 440 Vac 10 nF to 100 nF E109565 UL1283 and (CSA-C22.2 No. 8) 440 Vac 100 nF to 1 F E109565 CB-Test Certificate 440 Vac 10 nF to 1 F F1 5256 The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
(R)
16
MOUNTING
Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to "Packaging Information": www.vishay.com/docs/28139/packinfo.pdf Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: * For pitches 15 mm capacitors shall be mechanically fixed by the leads * For longer pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on printed Circuit Board The maximum length and width of film capacitors is shown in drawing: * Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned * Product height with seating plane as given by "IEC 60717" as reference: hmax. h' + 0.3 mm
bmax. = b + 0.3 mm Eccentricity
lmax. = I + 0.3 mm
CBA116
Storage Temperature * Storage temperature: Tstg = - 25 to + 40 C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2 %. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com 170
For technical questions, contact: RFI@vishay.com
Document Number: 28116 Revision: 10-Oct-08
MKP 338 1 X1
Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve)
4
Tanget of loss angle as a function of frequency (typical curve)
10 3
Dissipation Factor (x 10- 4)
C/C (%) 2 typical
0 max. -2
10 2
101 -4 min. -6 - 50 0 50 Tamb (C) 100 10
0
F =1 F C < 1 < C 0 nF nF 22 20 < C 2 F nF 47 n 47 < C F 10 n
10
1
10
2
10
3
10
4
f(Hz) 10 5
Impedance as a function of frequency (typical curve)
3
Resonant frequency as a function of capacitance (typical curve)
2
10
10
Impedance (I)
10
47
10 0n
nF
nF
10
1
10
10
0
F 47 0n F 10 00 nF
f (Mhz)
1
10 10
-1
0
X1
10
-2
10
4
10
5
10
6
10
7
f (Hz) 10
8
10
-1
10
100
1000
C (nF)
10 000
Max. RMS voltage as a function of frequency
10
3
Max. RMS current as a function of frequency
10 4
AC current (mA)
AC voltage (V)
1000 nF 470 nF 100 nF 47 nF 10 nF 4.7 nF 1nF Tamb 105 C
10 2 10
2
10 1
10 0 Tamb 105 C 101 1 10 10 10
2
-1
10
3
10
4
f (Hz) 105
10
1
10
2
10
3
10
4
f (Hz) 10 5
Document Number: 28116 Revision: 10-Oct-08
For technical questions, contact: RFI@vishay.com
www.vishay.com 171
MKP 338 1 X1
Vishay BCcomponents
Insulation resistance
106
Interference Suppression Film Capacitors MKP Radial Potted Type
105
104 0 20 40 60 80 100 Tamb (C)
APPLICATION NOTES
* For X1 electromagnetics interference suppression in standard across the line applications (50/60 Hz) with a maximum mains voltage of 440 Vac. * For series impedance applications we refer to Application Note www.vishay.com/docs/28153/anaccaps.pdf * These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. * The maximum ambient temperature must not exceed 105 C. * Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 615 Vdc and divided by the applied voltage.
RC (s)
www.vishay.com 172
For technical questions, contact: RFI@vishay.com
Document Number: 28116 Revision: 10-Oct-08
MKP 338 1 X1
Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type
INSPECTION REQUIREMENTS General Notes: 1. Sub-clause numbers of tests and performance requirements refer to the "Sectional Specification, Publication IEC 60384-14 ed-3 and Specific Reference Data."
Group C inspection requirements
SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) Initial measurements 4.3 4.4 Robustness o terminations Resistance to soldering heat Capacitance Tangent of loss angle at 10 kHz Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90 No pre-drying Method: 1A Solder bath: 280 C 5 C Duration: 10 s Isopropylalcohol at room temperature Method: 2 Immersion time: 5 0.5 min Recovery time: Min. 1 h, max 2 h Visual examination Capacitance Tangent of loss angle Insulation resistance SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements 4.20 Solvent resistance of the marking Capacitance Tangent of loss angle at 10 kHz Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 0.5 min A = - 55 C B = + 105 C 5 cycles Duration t = 30 min No visible damage Legible marking No visible damage Legible marking |C/C| 5 % of the value measured initially Increase of tan 0.008 Compared to values measured initially As specified in section "Insulation resistance" of this specification No visible damage As specified in chapters "General data" of this specification
CONDITIONS
PERFORMANCE REQUIREMENTS
4.19
Component solvent resistance
4.4.2
Final measurements
4.6
Rapid change of temperature
Document Number: 28116 Revision: 10-Oct-08
For technical questions, contact: RFI@vishay.com
www.vishay.com 173
MKP 338 1 X1
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST 4.6.1 4.7 Inspection Vibration
Interference Suppression Film Capacitors MKP Radial Potted Type
CONDITIONS Visual examination Mounting: See section "Mounting" of this specification Procedure B4 Frequency range: 10 to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s (whichever is less severe) Total duration 6 h Visual examination Mounting: See section "Mounting" for more information Pulse shape: half sine Acceleration: 490 m/s Duration of pulse: 11 ms Visual examination Capacitance Tangent of loss angle Insulation resistance No visible damage |C/C| 5 % of the value measured initially Increase of tan 0.008 Compared to values measured initially As specified in section "Insulation Resistance" of this specification PERFORMANCE REQUIREMENTS No visible damage
4.7.2 4.9
Final inspection Shock
No visible damage
4.9.2
Final measurements
SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B Temperature: 105 C Duration: 16 h
4.11.1 Initial measurements
4.11.2 Dry heat 4.11.3 Damp heat cyclic Test Db First cycle 4.11.4 Cold 4.11.5 Damp heat cyclic Test Db Remaining cycles 4.11.6 Final measurements
Temperature: - 55 C Duration: 2 h
Visual examination Capacitance Tangent of loss angle
No visible damage Legible marking |C/C| 5 % of the value measured in 4.11.1. Increase of tan 0.008 Compared to values measured in 4.11.1. No permanent breakdown or flash-over 50 % of values specified in section "Insulation resistance" of this specification
Voltage proof 1900 Vdc; 1 min between terminations Insulation resistance
www.vishay.com 174
For technical questions, contact: RFI@vishay.com
Document Number: 28116 Revision: 10-Oct-08
MKP 338 1 X1
Interference Suppression Film Capacitors Vishay BCcomponents MKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST SUB-GROUP C2 4.12 Damp heat steady state 56 days, 40 C, 90 to 95 % RH No load Capacitance Tangent of loss angle at 1 kHz Visual examination Capacitance Tangent of loss angle No visible damage Legible marking |C/C| 5 % of the value measured in 4.12.1. Increase of tan 0.008 Compared to values measured in 4.12.1. No permanent breakdown or flash-over 50 % of values specified in section "Insulation resistance" of this specification CONDITIONS PERFORMANCE REQUIREMENTS
4.12.1 Initial measurements 4.12.3 Final measurements
Voltage proof 1900 Vdc; 1 min between terminations Insulation resistance SUB-GROUP C3 4.13.1 Initial measurements 4.13 Impulse voltage Capacitance Tangent of loss angle at 10 kHz 3 successive impulses, full wave, peak voltage: X1: 4 kV Max. 24 pulses Duration: 1000 h 1.25 x URac at 105 C Once in every hour the voltage is increased to 1000 Vrms for 0.1 s via resistor of 47 5 % Visual examination Capacitance Tangent of loss angle Voltage proof 1900 Vdc; 1 min between terminations 2380 Vac; 1 min between terminations and case. Insulation resistance SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles Charged to 615 Vdc Discharge resistance: 616 Vdc R = --------------------------------------1.5 x C (dU/dt) 4.15.1 Initial measurements Capacitance Tangent of loss angle at 10 kHz
No self healing breakdowns or flashover
4.14
Endurance
4.14.7 Final measurements
No visible damage Legible marking |C/C| 10 % compared to values measured in 4.13.1. Increase of tan 0.008 Compared to values measured in 4.13.1. No permanent breakdown or flash-over
50 % of values specified in section "Insulation resistance" of this specification
Document Number: 28116 Revision: 10-Oct-08
For technical questions, contact: RFI@vishay.com
www.vishay.com 175
MKP 338 1 X1
Vishay BCcomponents
SUB-CLAUSE NUMBER AND TEST 4.15.3 Final measurements
Interference Suppression Film Capacitors MKP Radial Potted Type
CONDITIONS Capacitance Tangent of loss angle PERFORMANCE REQUIREMENTS |C/C| 10 % compared to values measured in 4.15.1. Increase of tan 0.008 Compared to values measured in 4.15.1. 50 % of values specified in section "Insulation resistance" of this specification
Insulation resistance SUB-GROUP C5 4.16 Radio frequency characteristic Resonance frequency
0.9 times value as specified in section "Resonant frequency" of this specification
SUB-GROUP C6 4.17 Passive flammability Class B Bore of gas jet: O 0.5 mm Fuel: Butane Test duration for actual volume V in mm: V 250: 10 s 250 < V 500: 20 s 500 < V 1750: 30 s V > 1750: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample.
12 mm ~ 8 mm
45.0
SUB-GROUP C7 4.18 Active flammability 20 cycles of 4 kV discharges on the test capacitor connected to URac The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required.
www.vishay.com 176
For technical questions, contact: RFI@vishay.com
Document Number: 28116 Revision: 10-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of MKP3381X108

	To Download MKP3381X108 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .